Автокран TADANO GR600EX View larger

All terrain crane TADANO GR600EX

New product

60 tons, 2-axle

More details

Data sheet

Capacity, t (max.) 60
Boom length, m (max.) 43
Boom length, m 11 - 43
Jib, m 9,9- 17,7

More info

Off-road truck crane GR600EX with a short base

    • MAXIMUM LOADING CAPACITY: 60,000 kg on 3 m
    • MOTION SPEED (MAXIMUM): 20km/h
    • WEIGHT: 43.735kg
    • MINIMUM TURNING RADIUS: 11,9 m (2WS), 6,8 m (4WS) (The center of extreme position outside wheels)
    • ARROW: to 5 the section, all-wheel drive, synchronized in parts telescopic arrow
    • Arrow length: 11,0 m – 43,0 m (two modes of telescoping)
    • Promotion speed: 32 m for 128 sec.
    • Arrow angles of lead: From-1,6 to 80,3 degrees
    • Hoisting speed: From 20 to 60 degrees for 46 sec.
    • MOULDING OGEE:  Two-level, with mechanical accession. Regulated on inclination of 3,5/25/45 degrees
    • Molding ogee length: 10,1 m and 17,7 m
    • The MAIN WINCH the Grooved drum is set in motion by the axial piston hydraulic engine through high-speed reducer of the winch.
    • Draft of unary rope: 54,9 kN (5,600 kgfs) 
    • Speed of unary rope: 136 m/min (on the fourth round)
    • The AUXILIARY WINCH the Grooved drum is set in motion by the axial piston hydraulic engine through high-speed reducer of the winch.
    • Draft of unary rope: 54,9 kN (5,600 kgfs) 
    • Speed of unary rope: 118 m/min (on the second round)
    • TURN SPEED: 2,4 RPM
    • Hydraulic system

    • PUMPS of 2 adjustable, piston pumps. The consecutive connected toothed pump for rudder control, rotation and additional equipment.
    • The CONTROL VALVES combined the valve are put in action by handles with the built-in pressure-relief valves.
    • CONTOUR: it is equipped with the oil cooler with air type of cooling. Tank capacity for oil of hydraulic system, about 840 l

Automatic limiter of the moment TADANO


    • The main block in crane cabin publishes sound and visual warnings of approach of overload. Operation of the crane automatically is interrupted in case of its overload. With function of restriction of the working area (load radius, arrow corner, the greatest height, turning angle)

Characteristics of the chassis


  • OUTRIGERS: 4 hydraulic portable support. Full - 7.300 mm. Average - 6.700 mm, average - 5.500 mm. Minimum - 2.700 mm. 
  • Size of support: (diameter): 600 mm
  • ENGINE:
  • Model: Mitsubishi 6M60-TL
  • Type: the diesel engine with water cooling, with direct injection, 6 cylinder, line, 4-stroke, with turbo-supercharging.
  • Cylinder volume - 7545 sm3
  • Maximum output power (SAE)... 200 KW at 2.600 RPM 
  • Maximum torsion torque (SAE)... 785 Nanometers at/1,400 RPM
  • TRANSMISSION: Completely automatic transmission with the hydraulic torque converter.
  • RUDDER CONTROL: Rudder control with the hydraulic drive 4 options Are possible: only lobbies, only back, crab course, coordinate movement
  • SUSPENDER: lobby – rigid fastening to frame; back – the shaking beam with the fixing hydraulic cylinders
  • TIRES:   29,5 –  25 22 PR(OR) lean-to x 4                
  • TANK CAPACITY: 300 liters
  • HOOKS: 5.6t and 60 t